At a Glance
- Course code: TLILIC0003.
- Duration: 2 days
- Start: 07-11-2025 ~08-11-2025
- Training Location: Welshpool
- NRT Type: Unit of Competency
- Qualification Level Name: Short Course
Overview
Saferight offers the Forklift Licence in Perth WA / TLILIC0003 – Licence To Operate A Forklift Truck training course, based on the National Standard for Licensing Persons Performing High Risk Work. This Forklift Training Perth course is designed for those required to operate a forklift.
Students will gain practical skills and theoretical knowledge to safely and efficiently operate a forklift. Upon completion, participants will receive a Forklift Ticket Perth, certifying their ability to operate a forklift truck.
Plan Work/Task
Identify task requirements
Assess work area and forklift suitability
Manage paths
Identify hazards
Implement traffic management
Establish communication
Prepare for Work/Task
Confirm workplan clarity
Evaluate environmental impact
Verify risk controls
Safely access and check forklift
Properly set up forklift with required attachments
Perform Work/Task
Operate forklift safely as per Australian standards
Monitor load stability
Respond to safety issues
Properly handle loads
Ensure forklift is parked and isolated appropriately
Pack Up
Complete forklift shutdown in line with Australian safety procedures
Secure the forklift to prevent unauthorised use
This comprehensive forklift training in Perth ensures you are fully prepared to obtain your forklift licence in Perth.
Outline
Accredited Units
You will be enrolled into the following unit of competency:
Entry Requirements
To enter the Forklift Licence Perth WA course, you must meet the following requirements:
Must be 18 years old and above
Present photo I.D. on arrival
If you have any physical conditions that may affect your ability to complete a course, please visit a doctor and obtain a “Fit for Work” certificate, and send it to our bookings email.
Please note, Saferight reserves the right to cancel your enrolment if this documentation is not provided and you are deemed unfit for training. Additionally, cancellation fees will apply if adequate notice is not given.
Hi-vis shirt or vest must be worn while attending your course – failure to comply may prevent you from participating. Steel cap boots are required, and all jewellery must be removed before the course begins.
Ability to read, write and understand English
Saferight is dedicated to supporting all students, including those with Language, Literacy, and Numeracy (LLN) needs. If your LLN skills are assessed as needing improvement to meet the course requirements, we may recommend additional support or training to help you succeed. If you have any concerns about your LLN skills, we encourage you to contact us before enrolling.
Disclaimer: Students must complete the post-enrolment learner details form sent via the booking confirmation email prior to attending the course. Failure to fill out the post-enrolment form before training will result in certificates not being issued.
Assessment
Theory Component
Practical Component
Both components must be successfully completed to earn your Forklift Ticket Perth.
If you already have a Forklift ticket and only need a Verification of competency, A VOC for Forklift is available at Saferight. For more information, please visit our VOC Forklift course.
Certification
On successful completion of this course, students will receive a:
Nationally Recognised Statement of Attainment for TLILIC0003 – Licence To Operate A Forklift Truck
This certification allows you to apply for your Forklift Licence Perth / Forklift Ticket Perth through Worksafe WA.
The Unique Student Identifier (USI) must be supplied and verified prior to issuance.
High Risk Work Licence
Disclaimer: Competence in this unit does not in itself result in a High-Risk Work Licence (HRWL) to operate this equipment or perform this skill. The course price listed excludes HRWL application fees..
A High Risk Work Licence (HRWL) is a photo ID issued to those trained and assessed as competent for high-risk.
Saferight can assist you with your High Risk Work Licence (HRWL) applications to WorkSafe. Please follow the instructions below when enrolling through our website, based on your specific needs:
For New HRWL Applications
Select “High Risk Work Licence (New)” and “Photo (6x)” during the enrolment process.
Important: You must select the “Photo (6x)” option when applying for a new HRWL. If you forget to select the photo option, the charge will be added manually when you attend the training.
For Transferring an Existing HRWL
Select “High Risk Work Licence (Transfer)” and “Photo (6x)” during the enrolment process.
Important: You must select the “Photo (6x)” option when applying for transferring a HRWL. If you forget to select the photo option, the charge will be added manually when you attend the training.
For Adding a New Class to an Existing HRWL:
Select “High Risk Work Licence (Adding a Class)” during the enrolment process.
Note: If you’re adding a class to an existing HRWL, you do not need to select the “Photo (6x)” option.
If You Want to Handle Your HRWL Applications Yourself:
Simply proceed with your enrolment without selecting any of the HRWL options. This allows you to manage your HRWL application independently.
For detailed guidance on applying for a new HRWL yourself, please visit: https://www.commerce.wa.gov.au/worksafe/apply-new-high-risk-work-licence-0
To add a new licence class to your existing HRWL yourself, please visit: https://www.commerce.wa.gov.au/worksafe/add-class-your-high-risk-work-licence
Duration
This forklift training in is delivered over:
2 Days (7.30AM – 3.30PM)
3 Days (Night Class):
Tues-Wed (4 PM – 9 PM) + Thursday (4 PM – 10 PM)